Shafts

Stainless steel shafts that have a surface finish better than 16 RMS and .0007 in tolerance.

Part MBi0250

Shift Part Number	Size	Tolerance	Compatible With	Lenghts
Air Bushings (Metric)
OAV06MMSHAFT	6 mm	+.00/-.018 mm	OAV006MB	300 or 600 mm
OAV08MMSHAFT	8 mm	+.00/-.018 mm	OAV008MB	300 or 600 mm
OAV10MMSHAFT	10 mm	+.00/-.018 mm	OAV010MB	300 or 600 mm
OAV13MMSHAFT	13 mm	+.00/-.018 mm	OAV013MB	300 or 600 mm
OAV20MMSHAFT	20 mm	+.00/-.018 mm	OAV020MB	300 or 600 mm
OAV25MMSHAFT	25 mm	+.00/-.018 mm	OAV025MB	300 or 600 mm
OAV40MMSHAFT	40 mm	+.00/-.018 mm	OAV040MB	300 or 600 mm
OAV50MMSHAFT	50 mm	+.00/-.018 mm	OAV050MB	300 or 600 mm
OAV75MMSHAFT	75 mm	+.00/-.018 mm	OAV075MB	300 or 600 mm
OAV90MMSHAFT	90 mm	+.00/-.018 mm	OAV090MB	300 or 600 mm
Air Bushing (English)
OAV0250SHAFT	0.250 in	+.0000/-0.0007 in	OAV0250IB	12 or 24 in
OAV0312SHAFT	0.312 in	+.0000/-0.0007 in	OAV0312IB	12 or 24 in
OAV0375SHAFT	0.375 in	+.0000/-0.0007 in	OAV0375IB	12 or 24 in
OAV0500SHAFT	0.500 in	+.0000/-0.0007 in	OAV0500IB	12 or 24 in
OAV0750SHAFT	0.750 in	+.0000/-0.0007 in	OAV0750IB	12 or 24 in
OAV1000SHAFT	1.000 in	+.0000/-0.0007 in	OAV1000IB	12 or 24 in
OAV1500SHAFT	1.500 in	+.0000/-0.0007 in	OAV1500IB	12 or 24 in
OAV2000SHAFT	2.000 in	+.0000/-0.0007 in	OAV2000IB	12 or 24 in
OAV3000SHAFT	3.000 in	+.0000/-0.0007 in	OAV3000IB	12 or 24 in

Bushings Face Collar

Request For Quote

Support Rail Shafts

Stainless steel shafts with a support rail for stable setup which eliminates bending and stops linear bearings from rotating.

Shaft Part Number	Size	Tolerance	Compatible With	Lengths
Open Pillow Air Bearing (English)
OAVSRS0500	0.500in	+.0000/-0.0007	OAVRGL0500	12 or 24in
OAVSRS1000	1.000in	+.0000/-0.0007	OAVRGL1000	12 or 24in
Open Pillow Air Bearing (Metric)
OAVSRS012m	12mm	+.00/.02mm	OAVRGL0500	300 or 600mm
OAVSRS025m	25mm	+.00/.02mm	OAVRGL1000	300 or 600mm

Recomended AIR Quality

Between ISO 8573.1 Quality Classes 3 & 4. Minimum recommendation: dirt particle size at 15 microns, dew point at 37 deg F, oil/vapor content at 5mg per cubic meter. Ideal working condition: dirt particle size at 5 microns, dew point at -4 deg F, oil/vapor content at 1 mg per cubic meter.