_edited.jpg)
Performance Note: Load, stiffness, flow rate, and moment values are based on testing at 60 PSI supply pressure. Actual performance may vary depending on shaft quality, mounting method, air supply stability, and application conditions.
Title | Specification |
Size | 80 mm |
Part Number | OAVR080RV |
Input Pressure | 20 – 100 PSI (0.14 – 0.69 MPa) |
Input Vacuum | 15 in Hg |
Ideal Load | 113 N (25.3 lbs) |
Stiffness | 30 N/μ (0.17 lbs/μin) |
Flow Rate | 1.3 NLPM (2.8 SCFH) |
Fly Height | 5 μ |
Bearing Size | 80 mm |
Bearing Height | 22 mm |
Bearing Weight | 253 g |
Housing Material/Finish | 7075 Aircraft Quality Aluminum/ Mil Spec Hard Anodize |
Porous Media Material | Carbon |
Flatness | 0.001 mm (0.00004 in) |
Pressure Port Thread | M5 x 0.8 |
Vacuum Port Thread | M5 x 0.8 |
recommended with
Retaining Plate
Part # OAVBR20R32
The Ball Retaining Plate is made of high quality anodized aluminum that meets aerospace quality.
Mounting Screw
Part # OAV20MMSCREW
This high carbon stainless meets aerospace quality. With ball end configuration .0006 mm tolerance always parallel and easy to install.